SXC-8A1 online pulse controller
Working principle：
When a duster works, it filters while deashing by blowing. The pulse controller outputs electric signals to control the pulse valve for deashing by blowing one by one in line with the set pulse width and interval.
Technical parameters：
| ◆ |
Number of valve : 1~80, optional |
| ◆ |
Output : DC24V/1.5A,AC220V/0.15A |
| ◆ |
Pulse width : 0.01~0.12 seconds |
| ◆ |
Pulse interval : 1~255 seconds |
| ◆ |
Pulse cycle : 0~255 seconds |
| ◆ |
Timing/fixed differential interface : two control modes, optional |
| ◆ |
Input power:
Purified power : AC170~250V。
Ordinary power : AC220V。 |
SXC-8B off-line pulsercontroller (includeing air box pulse)
Working principle：
A duster is divided into several units, each of which removes dust one by one separately. It requires that when a deashing unit stops filtering，the pulse controller should output an electric signal to close the poppet valve of the unit cylinder and then the pulse valve in the unit will remove dust one by one by blowing.
Technical parameters：
| Valve No. |
1~64, optional |
| Unit No. |
1~16, optional |
| Output |
DC24V/1.5A,AC220V/0.15A |
| Time parameters |
① Pulse waiting：8 s
② Pulse width：0.01~0.12 s
③ Pulse interval：1~255 s
④ Sedimentation time：1~255 s
⑤ Unit break：1~255 s
⑥ Pulse cycle：0~255 s |
SXC-8B2 specification :
| Name |
room/path |
output |
| off-line |
1-64 room transmission |
DC24/AC220 |
| air box |
1-24 room transmission |
DC-24/AC220 |
SXC-P electric control cabinet
Introduction：
The computer control cabinet for SXC-P pulse bag duster produced by our factory is a product of new generation for special use in the comprehensive control of dusting system with programmable logic controller （PLC）of Japanese make (MITSUBISHI). It features good reliability and lower failure rate. It can control the deashing process of a duster and is started by the major blower and ancillary device in the system. Various functions can be expanded as required.
|
|
SXC-8A2 differential pressure pulse controller
Working principle：
When the difference of pressure measured by differential pressure box is over set parameters. The pulse controller outputs electric signals to control the pulse valve for deashing.
Technical parameters：
| Type |
Output digit |
Overallmm |
Weight Kg |
| SXC-8A1 |
1-20 door |
250*190*100 |
2.8 |
| SXC-8A2 |
1-20 door |
160*300*330 |
6.0 |
| SXC-8A1 |
21-40 door |
250*260*100 |
3.2 |
| SXC-8A2 |
21-40 door |
160*300*330 |
6.0 |
| SXC-8A1 |
41-80 door |
295*255*115 |
3.2 |
SXC-3 temperature control-type computer controller
Working principle：
SXC-3 computer pulse controller features great anti-interference, durability and intelligence. The product is mainly used in the furnace，especially in the vertical cement kiln as an automatic controller in the pulse bag duster system. Its complete unit is made of internationally famous brand chips fully, thereby ensuring the great reliability of the complete unit.
SXC-3 computer pulse controller adopts duplex dual insurance monitoring dusting system inlet temperature to ensure automation regulation of duster inlet smoke temperature. Switch power is used：Power-line voltage is allowed to operate at a great fluctuation of AC100-240V. With multi-electrode power purification and digital filter software, the complete unit has great anti-interference. Intelligence is achieved by application of single chip processor technique and great support of software resources.
Technical parameters：
SXC-3 is composed of two major parts: pulse deashing and inlet temperature control.
Part of pulse deashing：
◆Pulse interval：1～255 s±1%
◆Output pulse width：0.1/0.12 s±1%
◆Power-line voltage：AC100～240V
◆Number of output route： 1～40（optional）
◆Output voltage and current for each route：DC24V/1.2A（Output from each route can drive two pulse valves simultaneously for long）
◆Operating environment：Temperature：-25～+55℃
◆ Relative humidity：<90% without heavy dust and air pollution
◆Temperature detection range：0～300℃±2% Four temperature control lines：each control line is set at 0～300℃±2%
◆Output voltage and current for each route：AC220V/1A（drive butterfly valve cylinder single coil electromagnetic valve）
◆Super-temperature acousto-optic alarm：
◆Compression pressure switch alarm K control limit：400KPa±5（back difference 80KPa）
|
